piegatrice automatica della staffa del tondo per cemento armato di CNC dell'asta di ferro della fabbrica

piegatrice automatica della staffa del tondo per cemento armato di CNC dell'asta di ferro della fabbrica

Technical parameter


 Modello

SGW4-12B

 Max Pulling Speed

100m/min

 Massima velocità di piegatura

1100°/sec

Angle tolerance

± 1 °

 Tolleranza di lunghezza

1 millimetro ±

 Max Bending Angle

180 °

Central Mandrel Diameter

22mm

Distance from bending shaft to ground

1250mm

Single Wire(mm)

4-12

Double Wire(mm)

4-10

Max side length

1.200 millimetri

Mini side length

80mm

Production capacity

1800

  L×B×H(mm)

3800*1320*1920

  Work  Power

380v

Total  Power

28KW

Descrizione del prodotto


1, the equipment is highly automated, and it can input hundreds of geometric processing graphics (or make graphics). Set the required processing dimensions arbitrarily, and you can choose any kinds of graphics.

2. Perfect combination of straightening, sizing, bending, hoop and cutting functions of steel bar, and truly realize the function of one machine with multiple functions.

3, the equipment needs only one person operation, the maximum capacity is 1800 hoop type / hour, which greatly improves the production efficiency and saves labor costs.

4, double line work can achieve efficient operation and improve production efficiency.

5. Using servo control system, servo motor and servo driver all adopt international famous brand, high precision, low failure rate, realize all automatic and uninterrupted bending process.

Caratteristiche del processo di progettazione


1. The equipment adopts the motion principle of servomotor + clean origin without any pollution to the environment.

2. The flexural telescopic action is equipped with two high-precision detection sensors to ensure the 100% reliability of the action.

3. no air pump and cylinder noise caused, save the maintenance time of pneumatic, at the same time no gas pump power consumption, can save two kilowatts per hour.

4. split type fixed knife design, no need to replace the whole, convenient maintenance, reduce cost; fixed cutter can be used two sides, improve the service life; four sides with a movable tool design, the service life increased 4 times, greatly reducing the cost.

Vantaggi dei dati tecnici


1. The shearing mechanism of the equipment is high speed mechanical shearing. Only 0.45S is needed for cutting at once, and three hundred thousand continuous high frequency and high working condition shearing tests are carried out.

2. It can meet the processing demand of three grade reinforcement(360Mpa), resistance to overload and high temperature resistance; the diameter range of steel bar: single line (4-12) mm, double line (4-10) mm.

3. The high precision servo drive with full closed loop control makes the length accuracy of the machining reach to + 1mm, and the angle accuracy reaches + 1 degree.

4. The bending mechanism can change the die, so that the minimum length of the stirrups that can be machined can reach 100mm.

5. high speed, no delay bending technology, the fastest can bend 1800 stirrups per hour.

Caratteristiche del sistema di controllo


1. The cutting tool is made of high quality and toughness alloy die steel. The acceptance standard is in strict accordance with the international standard NADCA207, and the performance of the material exceeds the level of 50%-80% of the same kind of national standard.

2. Special heat treatment process control ensures that the cutting times of cutting tools are more than 100000 times, and the service life is 10 times higher than that of common die steels.

3. The traction wheel is the most new type of high alloy wear-resistant steel, the raw material standard is higher than the national standard 3 grades, the advanced vacuum heat treatment process is adopted, its wear resistance is higher than the domestic equal quality die steel 30%-50%, performance is 3-5 times of the ordinary die steel.

Caratteristiche del processo di lavorazione delle parti


Con un numero di centri di taglio laser CNC completamente automatici, più robot di saldatura automatici, centinaia di centri di lavorazione verticali e orizzontali precisi, lavorazioni meccaniche di precisione di parti e componenti, il tasso di cambio del cento per cento.

Composition of equipment


1. Wire laying mechanism

(1) Due set di rack per artiglieria, ogni set può sopportare 2 tonnellate. Il rack L è orizzontale e può essere posizionato orizzontalmente. Dopo aver posizionato le barre d'acciaio, le vergelle vengono automaticamente consegnate al motore principale.

(2) il cestello L è equipaggiato con un set di dispositivi di cablaggio, che può impedire efficacemente il disordine della barra d'acciaio.

2. The traction straightening mechanism is composed of the external transverse and the internal vertical two straighteners, and the last two straightening wheels are divided into two parts, which can ensure the independent adjustment of the double wire straightening.

3. The shearing mechanism of the bending and shearing mechanism is composed of a fixed blade and a moving blade driven by an electric motor. The fixed blade is used to limit the direction of the steel bar and can be replaced rapidly within a few seconds. The mobile knife can be used on four sides, and the maintenance cost is low.

4. The electric control system adopts the industrial computer CNC control system with high accuracy, and it can adapt to the very bad working environment. With liquid crystal color display, through the touch screen input, we can design 32 stirrups and outline bars with any shape in the corners.

Info Veloci


Condizione: Nuovo
Luogo di origine: Shandong, Cina (continente)
Marca: JIAXIN
Machine Type:Coiling Bending Machine
Materia prima: barra d'acciaio
Materiale / metallo trattato: acciaio al carbonio
Potenza: Cnc
Automation: Automatico
Extra Services:BENDING
Certification:ISO 9001:2000, ISO9001-2008
Product name:Automatic Rebar Stirrup bending machine
Type:Automatic
Usage:rebar process
Power Consumption:5KW
Weight:1700KG
Track Speed:100m/M
Length Accurancy:±1mm
Dimension:3650*1200*1950mm
Color:Slivery gray
Servizio post-vendita fornito: tecnici disponibili per l'assistenza